Skip to content
Black Friday Sale!   Big Discounts!
Free Shipping + Quality Guarantee
Questions? Call 1-800-540-9051
Black Friday Sale!   Big Discounts!
Free Shipping + Quality Guarantee
Questions? Call 1-800-540-9051
Illustrative residential heat-pump outdoor unit in a winter garden

Home Heating and HVAC Systems: A Minnesota Homeowner’s Guide

HVAC stands for heating, ventilation and air conditioning. It covers every part of your home that heats the air, moves it and cools it. The part most Minnesota homeowners think about first is the heater, and that comes in several types.

What does an HVAC system actually include?

An HVAC system has three jobs. Heating warms the house. Ventilation moves air through ducts and brings in fresh air. Air conditioning removes heat and moisture in summer.

In many homes one blower and one set of ducts handle all three jobs. That is why a failed blower can leave you without heat in January and without cooling in July. Radiator and boiler homes often split the jobs, with hot water pipes for heat and separate equipment for cooling.

When the heating side fails in winter, hvac repair is not something to put off. One Twin Cities company lists 24/7 emergency service for furnaces, air conditioners and heat pumps. Its page also says most repairs are completed the same day, with parts already on the truck.

What are the main types of home heaters?

Most houses use one of four types: a furnace, a boiler, a heat pump or a hybrid of two. This Old House lists typical installed costs for each. These are national averages, not quotes from any contractor, and local prices vary. The table below sets the types side by side.

Heater type How it heats Typical installed cost
Gas or oil furnace Burns fuel, then a fan pushes warm air through ducts $3,800 to $10,000
Boiler Heats water and sends it to radiators, baseboards or floor loops $3,700 to $8,300
Air-source heat pump Moves heat from outdoor air into the house using electricity $4,500 to $8,000
Hybrid system Pairs a heat pump with a gas furnace $2,500 to $10,000

How does a furnace differ from a boiler?

A furnace heats air, and a boiler heats water. A furnace burns natural gas, propane or oil, or uses electric elements, and warms a metal heat exchanger. A blower then pushes the warmed air through ducts to each room.

A boiler sends hot water to radiators, baseboard units or tubing under the floor. Boiler homes feel steady and quiet because no air is blowing. Many older Twin Cities houses have radiators, so check your basement before you assume you own a furnace.

Do heat pumps work in Minnesota winters?

Newer cold-climate models can. The U.S. Department of Energy says older heat pumps were generally unsuitable where freezing temperatures last a long time. It describes newer cold-climate designs as a legitimate heating option in colder regions.

The Department of Energy also says a properly installed air-source heat pump can deliver up to three times more heat energy than the electricity it uses. That works because it moves heat and does not burn fuel. For cold areas, the agency advises looking for the highest heating efficiency rating (HSPF) you can afford.

A hybrid system is another route. This Old House notes that these setups switch to the gas furnace when outdoor temperatures drop below about 40°F. You get heat pump savings in mild weather and furnace power on the coldest nights.

What should you do when the heater stops working?

First check the basics: thermostat settings, the power switch, the breaker and the filter. This Old House says forced-air filters should be replaced at least twice a year. If those checks do not restore heat, call a professional.

Be ready to describe the symptoms. Note whether the system will not start, runs without heating, or makes unusual noises or smells. A burning smell, a pilot light that keeps going out and a unit that turns on and off repeatedly are all worth reporting. If you smell gas, leave the house and call from outside.

Avoid opening the burner area, touching gas valves or testing wiring yourself. Those jobs belong to a licensed technician.

How do you tell which heater you have?

Look at the equipment in your basement or utility room. A tall metal cabinet with large ducts running out of the top or side is a forced-air furnace. A smaller unit with water pipes and a pressure gauge is a boiler. A box outside the house with a large fan, connected by refrigerant lines to a unit indoors, is usually a heat pump or an air conditioner.

The label on the equipment lists the brand, the model number and often the fuel type. Take a photo of it. That label tells a technician what parts the unit uses and how old it is, and it saves time on a service call.

How can you keep any heater running longer?

Schedule a yearly tune-up before the cold season. This Old House puts a professional tune-up at about $75 to $200 per year. Heating can account for about 29% of a home's energy bill, per the same source, so a clean and well-adjusted system also saves money.

Between visits, keep vents clear, change filters on schedule and keep snow away from outdoor vents and units. Learn which type of heater you own, and write down its model number. That small step helps any technician diagnose a problem faster.

Previous article Clever Ways to Hide an Ugly Boiler: Boxing-In Ideas, Ventilation Rules and Costs
Next article What a Sewer Scope Can Tell Connecticut Homeowners

Leave a comment

Comments must be approved before appearing

* Required fields

Location

We are located in central California and sell online only.

Free Shipping

When you spend $200+

5 Star Reviews

Thousands of
Satisfied Customers.

Give Us A Call

1-800-540-9051

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare